Skip to main content
Ring (951) 383-2941

About the job ยท Temecula

Gas shut off valve for earthquakes, Temecula: what to know

An earthquake-actuated gas shut-off valve cuts off the supply on its own when strong shaking hits. Here is how the options differ, the steps to take once a quake has passed and how a plumber is arranged for the install.

  1. Describe the job. A short form, two minutes or so.
  2. We arrange the visit. A local plumber specialist comes to you, looks at the job and asks what they need.
  3. You decide. The quote is in writing before any work starts.

Tell us about your plumber job

A few details and we'll set up a visit from a local plumber specialist, then a written quote.

Lets the business see where the job is before they quote.

We earn a referral fee from the plumber who takes your job. You pay us nothing.

Earthquake gas valve in a gas line, with its ball dropped into the seat and gas blocked.

The earthquake gas valve is a mechanical device on your gas line that senses strong ground motion and closes on its own, so a broken pipe or appliance connector does not feed a fire. It does not replace turning the gas off by hand when you smell gas. Installing one is gas line work, and the wider topic sits on the gas line page.

What makes the valve shut when the ground shakes?

Most automatic valves hold a small ball or weight in a cradle. Shaking above a set level tips the ball off, it drops into the valve seat and blocks the gas flow. Once closed, it stays shut until a person resets it by hand. Temecula sits in a seismically active region, so the idea is to stop a gas leak before anyone knows it started.

The devices you will meet fall into two groups: seismic valves fitted downstream of the gas meter, on the house side, and excess flow valves that respond to a sudden rush of gas, such as a broken line. They are not the same. An excess flow valve does not react to shaking and may miss a slow leak, while a seismic valve may close on a strong jolt even when nothing has broken. Ask a plumber which kind the quote includes. A well-made range of seismic valves is sold for gas lines of different sizes, and the right one depends on the pipe size and the pressure.

Is the gas meter shut-off the same thing?

No. Every gas meter has a manual shut-off valve, and you can close it with a wrench in an emergency. An automatic earthquake valve is a separate device, mounted on the pipe after the meter. Both the meter and the piping leading up to it belong to SoCalGas, so the utility has rules for what you may do around it.

Sequence showing the manual meter shutoff on the utility side and the earthquake valve on the house side.

Learn the meter's location, and store a wrench nearby if the utility's guidance allows it. If you ever shut the gas at the meter in an emergency, leave it closed: SoCalGas should bring service back and relight appliances safely. Whenever gas can be smelled, leave the house first, then phone SoCalGas on 1-800-427-2200 from the yard or street, and dial 911 should you be in danger. Avoid switches and phones indoors. A gas meter earthquake shut off valve that is added by a plumber is usually installed downstream, not by modifying the utility's equipment.

What should you do after an earthquake?

Gas comes first. If you smell it, hear a hiss or see damage near a gas line, everybody moves outside. Close the meter valve just when doing so is safe, and phone SoCalGas from outdoors. Do not use matches, lighters or light switches. Without any sign of a leak, shutting off the gas is unnecessary, but do inspect appliances and water heaters.

Inspect the water heater, since it can shift or tip in a quake. Under California rules it should be braced or strapped, and an unsecured one can tear its gas connector. Check the gas flex lines to the range, dryer and furnace. If an automatic valve has tripped, a reset is needed, and before you reopen it a plumber should test the piping for leaks. The same applies to a valve that closed and you do not know why.

How is a valve reset after it trips?

The reset procedure depends on the model. Many valves have a reset lever or button, and the manufacturer's instructions say to wait for the pipe pressure to equalize, then reset. Before you reset anything, make sure there are no gas smells, because a closed valve may have done its job. Pilot lights then need relighting, and a plumber or the utility can do that.

When in doubt, leave it unreset. A valve that closes repeatedly can mean the unit is too sensitive for the installation, a leak is present, or the mounting has loosened. A plumber should come and look at that. Valve installation and any piping change count as gas work, which California treats as a contractor's job.

Which earthquake gas valve should I choose?

No one valve is best for everyone. What matters is that the model has approval for use in California, suits your gas line size and pressure, and is installed by a contractor following the manufacturer's instructions. A plumber can point you to models they have used and can explain the difference between seismic and excess flow types. Be wary of any claim that a valve will always prevent a gas fire.

Gas fires after strong quakes are the reason these valves exist at all, and no one valve stops every one of them. Whether your city requires a valve depends on the building type and the work being done, and some jurisdictions call for them with new construction or major gas work. Call City of Temecula Building and Safety on 951-694-6439; properties beyond the city should ask the permit office of Riverside County or of San Diego County.

Who fits the valve, and is a permit required?

The plumber fits the valve downstream of the meter, on the house side: gas off, valve cut in, line pressure tested, appliances relit. A contractor license is generally required in California for permitted work and for any job of $1,000 or more in labor and materials, and alterations to gas piping typically need a permit and an inspection.

Skip the do-it-yourself route, because leak testing is the critical step and a poorly sealed thread on a gas line is dangerous. No price is published here, as the cost depends on pipe size, meter location, access and the model; before any work begins, the plumber supplies a written quote.

How we arrange a valve visit

Use the quote page to describe the home, the meter location and what you want done. We pass requests to local plumbing businesses that pay us a fee, and one will contact you to schedule a visit. Phone hours are weekdays, 9am to 5pm. The Temecula Pipe and Repair home page lists our other services.

Common questions

How much time does a valve installation need?

A single-family home with an easy-to-reach meter and plain piping usually needs a few hours. The gas goes off, the valve is fitted and tested, leaks are checked and appliances are relit. Unusual pipe layouts, cramped spaces or other gas work uncovered on the way can lengthen the visit, and a permit inspection may follow.

What should I ask an installer?

Ask whether the model is approved for California, which type it is (seismic or excess flow), how it will be pressure tested, if the price includes the permit, and which items the written quote covers. Ask how resetting works too, so a quake or a false trip does not surprise you.

Must someone over 18 be at home during the install?

Yes, since the gas is off during the work and appliances need relighting after. The plumber also needs to reach the meter area and the pipe beyond it. For a gated property, say so in your request and the visit can be planned around that.

Can an automatic valve close when there is no earthquake?

Yes, in some cases. A strong bump, a nearby impact or heavy vibration can trip a valve, and a poorly mounted unit may be more sensitive. If it closes, wait to reset it until you have ruled out any gas smell. A plumber can inspect the mounting and the piping.

Is an earthquake gas valve required in Temecula?

The answer turns on the property and the work being done. We have not found a rule that makes it universal for existing homes in the area, and the answer for your address can differ by city or county. Ask City of Temecula Building and Safety, or the county that issues permits for your property.

Sources used

Updated