Gas work is not a weekend project, and in California the law treats it that way. Piping, appliance connections and most meter-side work have to go to a contractor holding the proper state license, and many jobs need a permit and an inspection. Backflow devices follow a separate rulebook run by your water supplier. This page sorts out which rule applies, starting from the main page of the site.
Who is allowed to do gas piping work in Temecula?
Hire a contractor whose California license covers the task, typically a plumbing or similar classification. Under state law, a job needs a contractor license when it requires a permit or when labor and materials add up to $1,000 or more. Extending gas lines, hooking up new appliances and altering anything near the meter normally need a permit, so homeowners should not run gas pipe themselves.
You can check any business on the contractors state board's website using its license number. Ask for it before work starts, and make sure the name on the license matches the name on the contract.
Utility equipment falls under different rules. SoCalGas serves Temecula and owns the meter and the line leading up to it. Leave the meter alone if anything about it looks wrong. Gas line jobs and what they cost have their own pages.
What is the right response to a gas smell?
Clear everyone from the building immediately. Do not switch lights or appliances on or off, and do not make calls from inside. Once outside, call SoCalGas on 1-800-427-2200, or 911 when someone is in danger or you can hear a hiss. Stay away until the gas company or fire crew declares it safe.
The order is important. A spark from a switch, a doorbell or a garage opener is enough to ignite a gas cloud, which is why the phone call happens outdoors.
When the all-clear comes, a leak that came from piping or an appliance still needs repair by a contractor, and often a pressure test. A seismic gas shutoff valve is one added precaution in earthquake country, discussed on the seismic shut-off valve page.
How does a gas line inspection work, and who does it?
Where a permit was pulled, the city or county sends an inspector once the contractor is done. City of Temecula Building and Safety, 41000 Main Street, handles Temecula permits. Riverside County covers unincorporated land, while parcels at Fallbrook, Rainbow and De Luz belong to San Diego County. Hours and phone numbers change, so confirm before going.
The inspector looks at pipe size and materials, supports, connections and a pressure test, and checks that shutoff valves and venting meet the plumbing code. The permit is closed once the work passes.
Not every address sits inside the city limits, even with a Temecula mailing address, and the postal ZIP code does not settle it. A ZIP such as 92590 appears on the city's own counter address, but city limits are decided by the parcel, so look yours up before choosing an office.
What is backflow testing, and does your property need it?
A backflow test checks that the protective device guarding the public water supply still keeps contaminated water from flowing in reverse into clean pipes. In California these devices are generally tested every year, plus once more after installation or repair; the water supplier runs the program and decides who may test.
Properties with irrigation systems, fire sprinklers, pools, commercial kitchens or other connections that could push contamination backward are the usual candidates. A letter from your water district is often the first sign a test is due, so watch your mail.
Testers normally need to appear on the water supplier's approved list, and in some places the state is raising the qualification bar, so do not assume last year's tester still qualifies. For details see backflow prevention testing, how a test is done and the backflow testing services guide.
When does a camera inspection make sense?
In a camera inspection, a small lens is fed along a drain or sewer pipe and shows cracks, roots, sagging sections or breaks with no digging. It fits older Rancho California tract homes that have clay or cast iron drains, a purchase where you want to see the lateral, and clogs that keep coming back after a temporary fix.
It does not replace a pressure test on gas or water lines. Cameras read drains. Gas lines are tested with air or gas pressure under a permit; water lines are tested at the fixture or manifold.
Ask for the video or stills, not just a verbal summary. A trustworthy report names the pipe material, shows where problems are and gives a distance from the cleanout. For prices and what is typically included, read about the cost of a plumbing inspection.
What is the way to arrange a visit?
Open the quote page and describe the job, whether that is moving a gas appliance, answering a backflow notice from your water district, inspecting before a home purchase or putting a camera into a slow drain. A local plumbing business gets the request and contacts you. Our posted hours run weekdays, 9am to 5pm.
We never do the work ourselves. The visiting business does, and it pays this site a fee for being introduced to you. Note down the address, the water or gas provider if you know it, any notice number you were sent and the ages of the appliances.
Common questions
May a homeowner swap a gas water heater without help?
Plumbing codes treat a water heater replacement as permitted work, and the contractor rules exclude do-it-yourself gas connections. Even an identical swap usually needs a permit, plus a pressure check on the connection. Ask the city or county office what applies at your address before starting.
Which office issues the permit, the city or the county?
The parcel decides. City of Temecula Building and Safety covers addresses inside the city limits. Riverside County takes Wine Country east of the limits, plus French Valley, Winchester and Aguanga, and San Diego County takes Fallbrook and Rainbow. When unsure, the plumber or the city counter can work it out from the parcel number.
How often does a backflow device need testing?
Programs generally call for at least one test per year, and another whenever the device is installed, moved or repaired; your water supplier may ask for more. Many suppliers send a notice by mail with a deadline and a list of approved testers. A missed deadline can bring a violation notice, so act when the letter arrives.
Does a camera inspection find gas leaks?
No. A drain camera only shows the inside of sewer and drain pipes, such as roots or cracks. Pressure tests and gas detectors are what find gas leaks. If you suspect gas, leave the building first, then ring SoCalGas at 1-800-427-2200 once you are outside, before anything else.
Guides in this section
- Backflow prevention testing
Does a Temecula home need backflow testing?
- Permits, codes and inspections
How a backflow test is done, who is allowed to do it, what the water district asks for, and how to pull a plumbing permit with the City of…
- Booking a backflow test
Who needs backflow testing in Temecula, how the annual test works, what the water district requires, and how a local tester is arranged.
- Costs
What a plumbing inspection, sewer camera check, smoke test and backflow test usually cost, plus how permits and city inspections fit in…
Updated